DESIGN AND CONSTRUCTION OF BATTERY CHARGER

DESIGN AND CONSTRUCTION OF BATTERY CHARGER

This project which consists of four chapters deals extensively with the design and construction of a battery charger which is capable charging a 12 volts, battery.

The first chapter which is the introductory chapter goes a long way in defining the battery charger and explaining of the mode of operation.

The second chapter went further to explain each component part of the battery charger. This ranges from:-
1. The transformer
2. The rectifier circuit
3. The filtering stage
4. Voltage regulation
5. Comparator
6. Thyristor
7. Resistor
8. Diode
9. Relay
10. Zener diode and
11. Light emitting diode (LED)

The third chapter explains more about the Testing Sensing and switching processes in the charger. It also gave the list of components and the circuit diagram of the battery charger.

The concluding chapter being fourth, tells us more about the circuit arrangements and the construction of casing and finally the overall cost analysis.

Title Page
Approval Page
Dedication
Acknowledgement
Abstract

Chapter One
1.1 Introduction

Chapter Two
2.1 Block Diagram Of Battery Charger
2.2 Transformer
2.3 Ac To Dc Converter
2.4 Filtering
2.5 Voltage Regulation
2.6 Comparator
2.7 Thyristor
2.8 Resistor
2.9 Diode
2.10 Relay
2.11 Zener Diode

Chapter Three
3.1 Network Synthesis And Testing
3.2 Power Supply
3.3 Sensing And Switching Circuit
3.4 Battery Condition Test
3.5 List Of Component Values

Chapter Four
4.1 Conclusion
4.2 Cost Analysis
Bibliography


Cite this article: Project Topics. (2021). DESIGN AND CONSTRUCTION OF BATTERY CHARGER. Retrieved October 18, 2021, from https://www.projecttopics.org/design-construction-battery-charger.html.



Copyright © 2021 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0


WeCreativez WhatsApp Support
We are here to answer your questions. Ask us anything!
Hi, how can we help?