Electrical & Electronics Engineering

GENERATION OF CONSTANT POWER SUPPLY FROM A DC SOURCE CHAPTER ONE 1.0  INTRODUCTION Direct current sources are not as easily generated as its alternating current counterpart, the...

DESIGN AND CONSTRUCTION OF INVERTER CHAPTER ONE 1.0      INTRODUCTION 1.0.1  What is an Inverter? An inverter (or power inverter) is an electronic circuitry that changes direct current (DC)...

THE DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED LIQUID LEVEL DETECTION SYSTEM ABSTRACT The project is based on the design and construction of a microcontroller based...

DESIGN AND CONSTRUCTION OF A SPEED CONTROL OF A DC FAN USING A FUZZY CONTROLLER INTRODUCTION 1.1 BACKGROUND STUDY Temperature Control cuts through a variety of Industrial...

DESIGN AND CONSTRUCTION OF AN UNMANNED GROUND ROBOTIC AGENT FOR PIPELINE INVESTIGATION CHAPTER ONE INTRODUCTION 1.1  BACKGROUND OF THE STUDY In the past decade there has been considerable...

EXPERIMENTAL DESIGN AND CONSTRUCTION OF A PROTOTYPE SOLAR POWERED INTERMITTENT ABSORPTION VAPOR REFRIGERATOR ABSTRACT At present, non-renewable energy sources are depleted constantly, Harmful emissions from fossil...

DESIGN AND CONSTRUCTION OF A 2KVA VARIAC (0V – 240V) RANGE ABSTRACT A variac is also known as a variable autotransformer. A single primary winding wrapped...

DESIGN AND CONSTRUCTION OF A PORTABLE REFRIGERATOR CHAPTER 1 1.1. HISTORY OF REFRIGERATOR ...

DESIGN AND CONSTRUCTION OF A PURE SINE WAVE SINGLE PHASE 2.5KVA INVERTER CHAPTER ONE INTRODUCTION 1.1      Background of the study Electricity power system is one of the economic...

DESIGN AND CONSTRUCTION OF A QUAD ROTOR CAPABLE OF LIFTING FROM THE FLOOR - PDF 1.0 INTRODUCTION An unmanned aerial vehicle (UAV) is an aircraft that...

FACTORS MILITATING AGAINST THE PERFORMANCE OF STUDENTS IN APPLIED ELECTRICITY ABSTRACT Until recently applied electricity technical education was meant for those who could not cope effectively...

CONSTRUCTION OF 150 WATTS 162 AUDIO LOUDSPEAKER Abstract Audio loudspeaker (output transducer) is on of the most essential and powerful device used in telecommunication system. This...

DESIGN AND CONSTRUCTION OF A 6V RECHARGEABLE LAMP ABSTRACT Man has been so used to electricity that he cannot do without it. The absence of electricity...

IMPLEMENTATION OF A 6V RECHARGEABLE LAMP Abstract Researchable lamp is a source of light that is generated from a D.C sources of supply this D.C sources...

DESIGN AND CONSTRUCTION OF 100 WATT AUDIO AMPLIFIER SYSTEMS Abstract The purpose this text is to present at a primary and intermediate level a comprehensive over...

FIRST EDITION OF THE TAPE RECORDER SERVICING MANUAL Abstract The essential instrument for any workshop are now and flutter meter electronic mill voltmeter audio Osillator distortion...

DESIGN AND CONSTRUCTION OF HOUSE BELL WITH INDICATING LIGHT Title Page Approval Page Acknowledgement Dedication Abstract Chapter One 1.0 Introduction Chapter Two 2.0 Literature Review 2.1 Preamble 2.2 Essential Parts Or Features Of An Electric...

DESIGN AND CONSTRUCTION OF TRAFFIC LIGHT Abstract This project traffic light is design for the safety ness of vehicles our the road. It is a very...

CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTER AND AUDIO CONSOLE USING FREQUENCY MODULATION FM WITH POWER RATING OF 1 WATT ABSTRACT The early transmitter for radio broadcasting...

DESIGN AND CONSTRUCTION OF A THREE PHASE AUTOMATIC PHASE SELECTOR ABSTRACT The basic aim of the design and construction of this three phase automatic phase selector...

DESIGN AND CONSTRUCTION OF 1000KWA STABILIZER – PDF ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all...

DESIGN AND CONSTRUCTION OF A 220 12 VOLTS SINGLE PHASE STEP DOWN TRANSFORMER ABSTRACT This is a technical project write-up design and construction were carried out...

DESIGN AND CONSTRUCTION OF A BATTERY CHANGER USING SILICON CONTROLLED REGULATOR SCR ABSTRACT The practical importance of a battery charger in today world cannot be over...

DESIGN AND CONSTRUCTION OF AN ARC WELDING MACHINE ABSTRACT The machine is designed to serve with an output of 250A. it has two pats which are...

DESIGN AND CONSTRUCTION OF AN FM TRANSMITTER ABSTRACT This project work is on the construction of an F.M transmitter this system consists of four discrete modules...

POWER AMPLIFIER – ELECTRICAL AND ELECTRONICS ENGINEERING PROJECTS Table of Content Title Page Approval Page Dedication Acknowledgement Preface List Of Symbols And Abbreviation Table Of Contents Chapter One 1.0 Introduction 1.1 General Description 1.2 Internal And External Feature 1.3 Sequences...

DESIGN AND CONSTRUCTION OF A DIGITAL INCUBATOR Table of Content Title Page Approval Page Dedication Acknowledgement Table Of Contents Preface Chapter One 1.0 Introduction Chapter Two 2.0 Project Review Chapter Three 3.0 Component Description Chapter Four 4.0 The Principle Of Operation Chapter Five 5.0 Packaging And...

DESIGN AND CONSTRUCTION OF AUTOMATIC CHANGE OVER WITH GENERATOR TRIP OFF Abstract As technological advancement has been on the increase in our society many have fallen...

DESIGN AND CONSTRUCTION OF A 12 VOLTS AUTOMATIC BATTERY CHARGER – PDF Abstract A battery charger is an electrical device employed for charging batteries. This batteries...

DESIGN AND CONSTRUCTION OF UNINTERRUPTIBLE POWER SUPPLY ABSTRACT The uninterruptible power supply (UPS) is design to help in the offices, workshops and house hold appliances, due...