Home Projects Engineering

Engineering

Engineering Project Topics and Research Materials

project topics and materials

Route Survey of Road and Pavement Design (Rehabilitation/Modernization)

Route Survey of Road and Pavement Design (Rehabilitation/Modernization) Case Study: Road Linking Federal Secretariat Industrial Centre and Mass Communication Department (IMT Campus III), Enugu ABSTRACT The study cover a view and a detailed explanation of the modification required to be carried out on the main access road linkage of the Campus III Industrial center from […]
To access this post, you must purchase Pro Plan.
project topics and materials

Development of Waste Based Bio-stimulant for the Remediation of Crude Oil Contaminated Soil

Development of Waste Based Bio-stimulant for the Remediation of Crude Oil Contaminated Soil ABSTRACT In this research work, the development of a waste based Bio-stimulant in the remediation of Crude-oil contaminated soil was investigated. Bio-stimulants used was plant waste (Plantain Peel) at a constant proportion of crude oil contamination and treated with varying concentration of […]
To access this post, you must purchase Pro Plan.
project topics and materials

CONSTRUCTION OF A PORTABLE REFRIGERATOR

CONSTRUCTION OF A PORTABLE REFRIGERATOR ABSTRACT This project write up focuses on the construction and analysis of a portable cooling system with compressor capacity of 105W. The principles of improving the operation of a cooling system, choice of materials, various methods used in the construction and recommendation for advancement where duly treated. As the cooling […]
To access this post, you must purchase Pro Plan.
project topics and materials

SUITABILITY OF THE APPLICATION OF FIRE DRILL IN THE PREVENTION OF MARKET FIRE

SUITABILITY OF THE APPLICATION OF FIRE DRILL IN THE PREVENTION OF MARKET FIRE (A CASE STUDY OF MARKETS IN OWERRI) ABSTRACT Fire safety in market is determined by a number of factors: the provisions of means of regulation against fire out break, the ability for a building to resist the effects of fire and to […]
To access this post, you must purchase Pro Plan.
project topics and materials

SELECTION AND UTILIZATION OF SOCIAL STUDIES INSTRUCTIONAL METHODS BY SECONDARY SCHOOL TEACHERS

SELECTION AND UTILIZATION OF SOCIAL STUDIES INSTRUCTIONAL METHODS BY SECONDARY SCHOOL TEACHERS IN EBONYI STATE. Social studies refers to the subject matter, possessing skills, attitudes and activities that focus on society and on individuals as members of a social group.
To access this post, you must purchase Pro Plan.
project topics and materials

FACTORS INFLUENCING THE CHOICE OF TEACHING AS A CAREER AMONG MALE STUDENTS

FACTORS INFLUENCING THE CHOICE OF TEACHING AS A CAREER AMONG MALE STUDENTS OF THE COLLEGE OF EDUCATION EKIADOLOR. This study relates to issues of professional autonomy and identify professional autonomy in teaching is suggestive of total involvement of education experts. Professional associates in all matters related to the education of the people often, people with little or no knowledge of professional training and competence
To access this post, you must purchase Pro Plan.
project topics and materials

THE EFFECT OF TEMPERATURE ON HYDROLYSIS OF CELLULOSE (SAW-DUST)

THE EFFECT OF TEMPERATURE ON HYDROLYSIS OF CELLULOSE (SAW-DUST) ABSTRACT The effect of concentration of hydrochloric acid on hydrolysis of cellulose (saw-dust) to glucose was studied on this research project and the steps obtained to achieve this project involved treatment of saw-dust (cellulose) with different concentrations of the acid at constant temperature of 80°? (350k) […]
To access this post, you must purchase Pro Plan.
project topics and materials

REFINING OF PALM KERNEL OIL

REFINING OF PALM KERNEL OIL ABSTRACT This work studied the refining of crude palm kernel oil derived from the kernels within the nut of a palm fruit. This research project was aimed at reducing the non-glycerides present in oil in their crude form using an alkali method of refining. The crude palm kernel oil was […]
To access this post, you must purchase Pro Plan.
project topics and materials

HEAD LOSSES IN HORIZONTAL AND VERTICAL ORIFICE METER A COMPARATIVE EVALUATION AND ANALYSES WITH...

HEAD LOSSES IN HORIZONTAL AND VERTICAL ORIFICE METER A COMPARATIVE EVALUATION AND ANALYSES WITH APPLICATION OF STATISTICAL METHOD OF DATA RELIABILITY ABSTRACT A comparative investigation was undertaken to determine the head loss coefficients for horizontally mounted and vertically mounted orifices using a Fluid mechanics and Heat transfer trainer developed in Nigeria. Experiments were carried out […]
To access this post, you must purchase Pro Plan.
project topics and materials

EFFECT OF PARTICLE SIZE ON OIL YIELD USING SCENT BEAN SEED (‘OZAKI’)

EFFECT OF PARTICLE SIZE ON OIL YIELD USING SCENT BEAN SEED (‘OZAKI’) ABSTRACT This project was done to extract and characterize bean oil according to their particle sizes. The experiment was carried out using scent bean (i.e. ‘Ozaki’, ‘Ijilizi’ or ‘Azamu’) as sample. The oils were extracted by solvent extraction/leaching extraction using n-hexane. Proximate analysis […]
To access this post, you must purchase Pro Plan.
project topics and materials

DESIGN OF FORCED CONVECTION HEAT TRANSFER RIG

DESIGN OF FORCED CONVECTION HEAT TRANSFER RIG ABSTRACT This project report contains experimental illustration of forced convective heat transfer rig, which consist of a tube, through which air is sent in by a blower. The test section consists of a long electrical surface heater on the tube which serves as a constant heat flux source […]
To access this post, you must purchase Pro Plan.
project topics and materials

ANALYSIS OF BUSH PEAR AND ITS OIL – PDF

ANALYSIS OF BUSH PEAR AND ITS OIL ABSTRACT The research project studies the analysis of pear and its oil. The mesocarp from edible African pear “Dacryodes Edulis” were evaluated for their oil yield. The pulp from this pear were oven dried at 100oC-105oC to a moisture content level of 29%.The mesocarp was subjected to proximate […]
To access this post, you must purchase Pro Plan.
project topics and materials

A COMPARATIVE ENTHALPY APPROACH FOR CO- AND COUNTERCURRENT FLOW IN CONCENTRIC TUBE HEAT EXCHANGER

A COMPARATIVE ENTHALPY APPROACH FOR CO- AND COUNTERCURRENT FLOW IN CONCENTRIC TUBE HEAT EXCHANGER ABSTRACT The comparison Evaluation of a heat transfer coefficient between the countercurrent and cocurrent flow arrangement was carried out on heat trainer, fabricated in Nigeria. The experiments carried out are of two different arrangement; countercurrent flow arrangement and co-current flow arrangement […]
To access this post, you must purchase Pro Plan.
project topics and materials

CONSTRUCTION OF MICROCONTROLLER BASED VEHICLE SPEED ALARM

CONSTRUCTION OF MICROCONTROLLER BASED VEHICLE SPEED ALARM. ABSTRACT The project is based on Construction of microcontroller vehicle speed alarm system which automatically warns the driver by activating a panic alarm which is triggered on when the driver exceeds the speed limit set in the system which also stops the alarm when the speed is reduced […]
To access this post, you must purchase Pro Plan.
project topics and materials

PATIENT HEARTBEAT AND TEMPERATURE MONITOR – PDF

DESIGN AND IMPLEMENTATION OF PATIENT HEARTBEAT AND TEMPERATURE MONITOR – PDF CHAPTER ONE INTRODUCTION 1.1 BACKGROUND Heartbeat rate means the number of heartbeats per unit time, usually expressed as beats per minute (bpm). The human heart pounds to pump oxygen rich blood to the muscles and carry cell waste products away from the tissues. Heartbeat […]
To access this post, you must purchase Pro Plan.
project topics and materials

HOME CONTROL SWITCH AUTOMATION USING GSM COMMUNICATION

HOME CONTROL SWITCH AUTOMATION USING GSM COMMUNICATION ABSTRACT The advantage of cellular communication like GSM technology is a potential solution for such remote controlling activities. GSM-SMS technology can be used to control household appliances from remote places. Remotely, the system allows the homeowner to monitor and control his house appliances via his mobile phone set […]
To access this post, you must purchase Pro Plan.
project topics and materials

DESIGN AND CONSTRUCTION OF AUTOMATIC PHASE SELECTOR

DESIGN AND CONSTRUCTION OF AUTOMATIC PHASE SELECTOR CHAPTER ONE INTRODUCTION As the growing population of human race widens the gulf between energy supply and energy demand, the imbalance in energy availability sent researchers into excavating for a way of settling this age long squabble. A lasting solution is vested on alternative use of the renewable […]
To access this post, you must purchase Pro Plan.
project topics and materials

DESIGN AND CONSTRUCTION OF 20WATTS WIRELESS PUBLIC ADDRESS SYSTEM

DESIGN AND CONSTRUCTION OF 20 WATTS WIRELESS PUBLIC ADDRESS SYSTEM ABSTRACT It has become inevitable that there would be communication and due to the inherent limitation of the human voice, the public address system came to being. A public address or “P.A SYSTEM” is an electronic amplification system with a mixer ,amplifier and loudspeakers, used […]
To access this post, you must purchase Pro Plan.
project topics and materials

DESIGN AND CONSTRUCTION OF A 60AMP THREE PHASE AUTOMATIC CHANGEOVER SWITCH

DESIGN AND CONSTRUCTION OF A 60AMP THREE PHASE AUTOMATIC CHANGEOVER SWITCH ABSTRACT The design and construction of a 60A, 3-Ф automatic power changeover from public utility supply to generator and vice versa was aimed at providing a useful system for use in our homes or offices. The system was achieved with a 66A 3-Ф contactor, […]
To access this post, you must purchase Pro Plan.
project topics and materials

CONSTRUCTION OF RADIO FREQUENCY GSM SIGNAL JAMMER

CONSTRUCTION OF RADIO FREQUENCY GSM SIGNAL JAMMER CHAPTER ONE INTRODUCTION 1.1 Introduction A wireless signal jammer is a device which blocks transmission by creating interference. This wireless signal jammer can be categorized into the Radio Frequency (RF) jammer and GSM jammer. A Radio Frequency jammer is a device used to disrupt or prevent communication via […]
To access this post, you must purchase Pro Plan.
project topics and materials

CONSTRUCTION OF A MICROCONTROLLER BASED T-JUNCTION TRAFFIC LIGHT CONTROLLER

CONSTRUCTION OF A MICROCONTROLLER BASED T-JUNCTION TRAFFIC LIGHT CONTROLLER – ELECTRICAL/ELECTRONIC ENGINEERING ABSTRACT T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the pedestrians […]
To access this post, you must purchase Pro Plan.
project topics and materials

CONSTRUCTION OF A GSM BASED HOME AUTOMATION USING AVR

CONSTRUCTION OF A GSM BASED HOME AUTOMATION USING AVR – ELECTRICAL AND ELECTRONIC ENGINEERING FINAL YEAR PROJECT TOPICS ABSTRACT With advancement of technology things are becoming simpler and easier for us. Automatic systems are being preferred over manual system. The purpose of this project is to design and construct A GSM based home automation using […]
To access this post, you must purchase Pro Plan.
project topics and materials

CONSTRUCTION OF A MICROCONTROLLER BASED GATE

CONSTRUCTION OF A MICROCONTROLLER BASED GATE – ELECTRICAL/ELECTRONIC ENGINEERING PROJECT TOPICS ABSTRACT Microcontroller based automate controller is a project design of a system that is used in operating a gate automatically. The system opens the gate automatically when a human being or car is about to enter a compound or exit a compound. The system […]
To access this post, you must purchase Pro Plan.
project topics and materials

CONSTRUCTION OF 500W 12V INVERTER CHARGER

CONSTRUCTION OF 500W 12V INVERTER CHARGER – ELECTRICAL/ELECTRONIC ENGINEERING PROJECT ABSTRACT An inverter is a system which is capable of converting DC voltage from a battery into AC voltage. The Inverter constructed converts 12V dc to 220V Ac. It consists of an oscillator section using 8V dc to produce 50Hz sine wave. The sine wave […]
To access this post, you must purchase Pro Plan.
project topics and materials

Construction of 12 Volts Battery Charger

Construction of 12 Volts Battery Charger Engineering Project Topics and Materials ABSTRACT This battery charger is a devices used to store the electrical energy to the battery after the battery has been discharged itself. The battery charger is designed to use electricity as its source of switch, regulation transistor, diode, light emitting diode, construction wire. […]
To access this post, you must purchase Pro Plan.
project topics and materials

DESIGN AND FABRICATION OF MINI CUPOLA FURNACE AND AN ATOMIZER FOR THE PRODUCTION OF...

DESIGN AND FABRICATION OF MINI CUPOLA FURNACE AND AN ATOMIZER FOR THE PRODUCTION OF POWDERED METAL FROM WASTE ALUMINIUM CANS ABSTRACT This research is centered on the design and fabrication of cupola furnace and atomizer for the production aluminium powder metal with the available material.0.4kg of refined coke was chosen as the basis for material […]
To access this post, you must purchase Pro Plan.
project topics and materials

DESIGN AND CONSTRUCTION OF A METAL DETECTOR

DESIGN AND CONSTRUCTION OF A METAL DETECTOR – Engineering Project Topics and Materials ABSTRACT The project work titled Design and construction of a metal detector. When fully design and implemented would be able to detect any metallic material that is passing or coming close. This function would serve as a security check for dangerous metallic […]
To access this post, you must purchase Pro Plan.
project topics and materials

DESIGN AND CONSTRUCTION OF UNINTERRUPTIBLE POWER SUPPLY

DESIGN AND CONSTRUCTION OF UNINTERRUPTIBLE POWER SUPPLY The uninterruptible power supply (UPS) is design to help in the offices, workshops and house hold appliances, due to the unstable power supply being supplied by (NEPA) presently known as Power Holding Company of Nigeria (PHCN) usually supply to us. With the help of the “UPS” we don’t […]
To access this post, you must purchase Pro Plan.
project topics and materials

THE EFFECTS OF DIFFERENT PROCESSING TECHNIQUES ON THE ORGANOLEPTIC QUALITY OF SOY MILK PROCESSING...

THE EFFECTS OF DIFFERENT PROCESSING TECHNIQUES ON THE ORGANOLEPTIC QUALITY OF SOY MILK PROCESSING AND STORAGE ABSTRACT Soymilk was processed from soymilk (Glycine Max) seed using that different processing techniques: A Hot extraction method B. Cold extraction method C. Soaking before hot extraction method. The soymilk samples were subjected to sensory evaluation using 9 point […]
To access this post, you must purchase Pro Plan.
project topics and materials

REFURBISHING OF A FIXED AND FLUIDIZED BED

REFURBISHING OF A FIXED AND FLUIDIZED BED ABSTRACT The repair of the fixed bed adsorption column, a product of arm field technical company was carried out for the purpose of bringing the faulty equipment back to its normal operating system. Before this exercise, the equipment was out of operation because of the completely blocked base […]
To access this post, you must purchase Pro Plan.